The boxing of the JPM sideboard provides excellent rigidity and gives better impact resistance. And if there are significant impacts inside the tipper, deformation is limited: the interior wall may be marked without this being visible on the exterior.
The most robust welding technique on the market.
Over the last 10 years the JPM fleet in circulation represents 50,000 steel bodies.
The primer and the thermosetting resin-based epoxy powder paint make a very resistant 120 µm layer.
The taper of the JPM pillar provides an efficient hold. The clamping screw makes it possible to take up any clearance which could appear over time. The pillar doesn't move and contributes to the long life of the tipper.
Double safety tall hinge
In addition to 2 leaves the universal door has manual unlocking from underneath.
The JPM removable tipper has a patented anti-theft device which fixes on the cradle hook.
All JPM tippers are fitted with stops on which the sideboards and the door rest when they are open.
It offers optimal visibility due to its safety grille whilst allowing the addition of options and coupling possibilities.
When closing the lip settles onto the platform thus ensuring better containment of fine loads such as sand.
The JPM outer frame is fitted with a return which is a good means of lashing along the entire length of the tipper.
The profile of the JPM sideboard offers a very large surface for stickers while guaranteeing maximum visibility of visuals due to its smooth appearance.
Customise your JPM tipper very simply: order options via our store and fit them easily and quickly. In this way you have a tipper customised to your professional requirements. In spite of everything, this same tipper can evolve. It can be customised in a different way at any time.
Collision or an unfortunate impact with a bucket can happen quickly on a site. Carry out repairs yourself in record time: order your door or your sideboards with just a few clicks on the JPM website.
2 years’ guarantee on purchase of the tipper
+ 1 additional year free when registering the tipper guarantee on our website
+ 2 additional years on sale on our website
BODYWORK |
| MAX. load capacity: 5 T Tipper platform in steel HX500 sheet thickness 3 mm |
| Longitudinal reinforcing spacers |
| Sideboards in steel S355, height 350 mm, thickness 2 mm, fold-down, removable, interchangeable (right/left, steel/aluminium) |
| Integrated closing of sideboards |
| Front face steel S355, height 450 mm, thickness 2 mm |
| Galvanised steel ladder rack, grille (section 4.5 mm), removable |
| Rear door in steel S355, height 450 mm, thickness 2 mm, 2 leaves and bottom unhooking by manual unlocking |
| Stops on sideboards and rear door |
| Rear pillars in galvanised steel, thickness 3mm, removable, with 12 mm fixing bolt and conical fitting |
| Seals between elements that are not continuously welded |
| 2 rear rollers in aluminium fitted on self-lubricating ring (no lubrication) |
CRADLE |
| Side members in IPE 140 |
| Centre distance 850 or 1060 |
| Hook height 920 mm |
| Gripper diameter 30 welded on structure in tube 120 x 60 |
| Exterior locking |
SAFETY |
| Anti-theft to be padlocked |
FINISH |
| DKP sheet + Degreasing + Shot blasting + 60 µm epoxy powder primer + 60 µm powder paint |
