Steel rear tipper Model 55

The boxing of the JPM sideboard provides excellent rigidity and gives better impact resistance. And if there are significant impacts inside the tipper, deformation is limited: the interior wall may be marked without this being visible on the exterior.

The most robust welding technique on the market.

Over the last 10 years the JPM fleet in circulation represents 50,000 steel bodies.

For our most common tipper lengths we use ZMA galvanised steel sheet: it is a standard hot galvanisation into which magnesium has been incorporated. It is this magnesium which makes it a much more effective galvanisation than a standard hot galvanisation. If there is an impact the steel sheet remains treated. It is the coating that is best adapted to aggressive environments: beside the sea or roads which have been salted. After controlled shot blasting (not destroying the GalvaZ), we apply

- a coat of primer - a thermosetting powder epoxy resin. It is a long life corrosion protection.

- a coat of paint: thermosetting powder polyester resin resistant to impacts and scratches.

That is a total minimum layer of 120 µm.

The net dumping capacity of a 3300 mm tipper is 4T3 (load uniformly distributed). We guarantee at least a net dumping capacity of 2T whatever the position of the load in the tipper (e.g. the whole load at the front).

The taper of the JPM pillar provides an efficient hold. The clamping screw makes it possible to take up any clearance which could appear over time. The pillar doesn't move and contributes to the long life of the tipper.

Double safety tall hinge

It offers optimal visibility due to its safety grille whilst allowing the addition of options and coupling possibilities.

When closing the lip settles onto the platform thus ensuring better containment of fine loads such as sand.

The rear aluminium rollers are fitted on a self-lubricating ring.

The door unhooks when the tipper is at 15°. Unhooking takes place by a direct connection of the tipper with the hook (no chain, or cable or tie rod).

The JPM outer frame is fitted with a return which is a good means of lashing along the entire length of the tipper.

The profile of the JPM sideboard offers a very large surface for stickers while guaranteeing maximum visibility of visuals due to its smooth appearance.

Customise your JPM tipper very simply: order options via our store and fit them easily and quickly. In this way you have a tipper customised to your professional requirements. In spite of everything, this same tipper can evolve. It can be customised in a different way at any time.

Collision or an unfortunate impact with a bucket can happen quickly on a site. Carry out repairs yourself in record time: order your door or your sideboards with just a few clicks on the JPM website.

2 years’ guarantee on purchase of the tipper

+ 1 additional year free when registering the tipper guarantee on our website

+ 2 additional years on sale on our website